Stickytapeandstring

Created with WordPress managed by 1&1

Crochet patterns

Daisy bag

by Leave a Comment

This bag was designed on my daily commute.   I love the fresh look with white cotton and picked the colours my daughter liked but the colour way is entirely up to you!

The finished bag measures 10 inches by 7 inches or 25cm by 18cm.   I put on one shoulder strap but it would easily convert to two smaller handles if you prefer.   I have included instructions for both.

The yarn I have used here is Drops Muskat a mercerized cotton which gives great stitch definition and a firm finish that should not stretch with use.   It works up on a 4mm hook and is very good quality/value.   I paid £1.45 per 50g ball.

Daisy Bag instructions – UK terms  (SCROLL DOWN FOR US TERMS!)

The pattern uses a 4mm hook and three colours of yarn.   For the example in the photo I used:

Yarn A – Drops Muskat – colour 19 – Light Grey

Yarn B – Drops Muskat – colour 18 – White

Yarn C – Drops Muskat – colour 06 – Light Pink

Starting with Yarn A – Light Grey

Base – Chain 5 stitches, slip stitch into the first chain to form a loop.  Chain 35.   slip stitch into the fifth stitch from the hook to form a second loop.

1st round – This is the only real fiddly bit so it is worth taking your time.  Chain 2, DC 30 along the straight chain.  Take care not to let the chain twist as you work it.   Don’t worry if you have to pull it out a couple of times to get it right (I did!).   Work 6DC into the end loop, DC 30 along the straight chain working into the DC’s from the first part of the round.   This gives a strong bottom to the bag.   your work should look like the photo’s below.   Finally – work 6 DC into the end loop and join with a slip stitch to your start point for the round.

2nd round – Chain 2, DC 31, work 2DC into each of the middle four of the six DCs you worked into the loop of the base.  DC 32, work 2DC into the middle four of the six DCs you worked into the second loop of the base.  1 DC, slip stitch to join to the start point of the round.

3rd round – Chain 2, DC 32, work 2DC into the next 6 stitches, DC 35, work 2 DC into the next 6 stitches, 1DC, slip stitch to join to the start point of the round.

The base of the bag is now complete!!  If you would like a bigger base – repeat the row above, adjusting the increase round the ends of the base to allow the work to lie flat.

4th round – Chain 2.   DC into every stitch BUT – only pick up the back of the stitch.  See photo below.   This creates a line that will form the edge of the bottom of the bag.

5th round – Chain 2, Tr into each stitch on the row below.   Slip stitch to join to the top of the three chains that started the round.   Note – lots of patterns would say to chain three before a round  of Trebles but I find that chain 2 works better for me and gives a neater finish.   It might be worth trying both versions to see what suits you best.

6th round – Chain 2, DC into each stitch on the row below.   Slip stitch to join to the top of the two chains that started the round.

7th round – repeat the 5th round working Trebles

8th round – repeat the 6th round working DCs

9th round – repeat the 5th round working Trebles

10th round – repeat the 6th round working DCs

Change colour!   Working with Yarn B – White –   I normally try to join in the yarn on the end of the bag so that the start of each row is not in the middle of the flat part where they are more visible.

11th round – repeat the 5th round working Trebles

12th round – repeat the 6th round working DCs

13th round – This round creates the ‘holes’ that we will later weave the bands through.  Chain 4, (miss one stitch and work Treble into the next, chain 1)  repeat to end of round.  Join with a slip stitch to the third of the four chains that started the round.

14th round – Chain 2, work one  DC into the ‘hole’ on the previous row.  Continue by working 2DC into each of the ‘holes’ created in the previous round.  Join with a slip stitch to the second of the two chains that started the round.

15th round – repeat the 5th round working Trebles

16th round – repeat the 6th round working DCs

17th round – repeat the 13th round, creating the holes.

18th round – repeat the 14th round working DCs into the ‘holes’.

19th round – repeat the 5th round working Trebles

20th round – repeat the 6th round working DCs

Change colour!   Working with Yarn C – Light Pink

21st round – repeat the 6th round working DCs

22nd round – repeat the 5th round working Trebles

23rd round – repeat the 6th round working DCs

24th round – repeat the 5th round working Trebles

25th round – repeat the 6th round working DCs

26th round – repeat the 5th round working Trebles

27th round – Chain 2, Htr into each stitch on the row below.   Join with a slip stitch to the second of the two chains that started the row.

28th round – Slip stitch into each stitch on the round below to create the decorative edge.   Join to the start point with a slip stitch and this completes the main part of the bag.

Creating the ‘ribbons’ that weave through the bag.

To create the two ribbons that you will weave in and out of the ‘holes’ in the bag, first take yarn A – Light Grey and make a chain 102 stitches long.

Slip stitch into the third stitch from the hook and keep going with a slip stitch into each chain until you get back to the start point.    Pull both ends through the loop on the hook to finish off, leaving the two ends which you will use to stitch up the ribbon.

Work the second ribbon in the same way but in yarn C – Light Pink.

Creating the flower decorations.

First Flower – Working with Yarn A – Light Grey.   

1st round – Make a magic loop then Chain 2, DC 11.  Join to form a disc.

2nd round – (Chain 6 slip stitch into the row below at the base of the chain.   Slip stitch into next stitch) repeat six times.   This will give you a disc with six chain stitch loops that will form the basis of the petals.

Change colour! – working with Yarn C – Light Pink

3rd round – (working into one of the chain stitch loops, 3 DC, 1 Htr, 1Tr, 1HTr, 3DC.  work one slip stitch into the stitch on the row below between the chain stitch petals), repeat six times until you have a full set of six petals.   You have a finished flower!

Second Flower – Now work the flower again switching round the two yarn colours.

Assemble the bag by slotting the ribbon through the ‘holes’.    I chose to put the Pink ribbon closest to the bottom and near to the Grey section of the bag.    If you weave the ribbon in and out of the holes over and under the Trebles that form the holes you should find you come back to the start with two ‘unders’ side by side.    This is probably easier to see in the photo below than it is to understand my explanation!

Join the two ends of ribbon at this point and then attach the flower over the top of the join, between the two places that the ribbon was woven under the bars.    I used the flower with the Light Pink petals at the bottom of the bag next to the section that was made in Light Grey.   ie use the flower with petals in Yarn C against the ribbon in Yarn C.

Finally – Adding Handles or Strap.  

To finish the bag you need to decide whether you would like a shoulder strap or twin handles.    The start point for both is to create ribbons as above.    Each strap or handle needs three ribbons which are plaited.

The ribbon length I used to create the shoulder strap was 202 chain.

The ribbon length I used to create each handle was 82 chain.

Work three ribbons – one in each colour.    Attach the three ribbons to each other at one end.   Note – if you use two of the ribbons the same way around and one the opposite way round you will have ends of yarn at both ends of the plait, this will help with the stitching up.   

 

Using the ends of yarn from each ribbon stitch the handles into the bag – and you are done!!   

I hope you enjoyed this pattern.   Please let me know.    US terms follow.

Daisy Bag instructions – US terms

The pattern uses a 4mm hook and three colours of yarn.   For the example in the photo I used:

Yarn A – Drops Muskat – colour 19 – Light Grey

Yarn B – Drops Muskat – colour 18 – White

Yarn C – Drops Muskat – colour 06 – Light Pink

Starting with Yarn A – Light Grey

Base – Chain 5 stitches, slip stitch into the first chain to form a loop.  Chain 35.   slip stitch into the fifth stitch from the hook to form a second loop.

1st round – This is the only real fiddly bit so it is worth taking your time.  Chain 2, SC 30 along the straight chain.  Take care not to let the chain twist as you work it.   Don’t worry if you have to pull it out a couple of times to get it right (I did!).   Work 6SC into the end loop, SC 30 along the straight chain working into the SC’s from the first part of the round.   This gives a strong bottom to the bag.   your work should look like the photo’s below.   Finally – work 6 SC into the end loop and join with a slip stitch to your start point for the round.

2nd round – Chain 2, SC 31, work 2SC into each of the middle four of the six SCs you worked into the loop of the base.  SC 32, work 2SC into the middle four of the six SCs you worked into the second loop of the base.  1 SC, slip stitch to join to the start point of the round.

3rd round – Chain 2, SC 32, work 2SC into the next 6 stitches, SC 35, work 2 SC into the next 6 stitches, 1SC, slip stitch to join to the start point of the round.

The base of the bag is now complete!!  If you would like a bigger base – repeat the row above, adjusting the increase round the ends of the base to allow the work to lie flat.

4th round – Chain 2.   SC into every stitch BUT – only pick up the back of the stitch.  See photo below.   This creates a line that will form the edge of the bottom of the bag.

5th round – Chain 2, DC into each stitch on the row below.   Slip stitch to join to the top of the three chains that started the round.   Note – lots of patterns would say to chain three before a round  of DC but I find that chain 2 works better for me and gives a neater finish.   It might be worth trying both versions to see what suits you best.

6th round – Chain 2, SC into each stitch on the row below.   Slip stitch to join to the top of the two chains that started the round.

7th round – repeat the 5th round working DCs

8th round – repeat the 6th round working SCs

9th round – repeat the 5th round working DCs

10th round – repeat the 6th round working SCs

Change colour!   Working with Yarn B – White –   I normally try to join in the yarn on the end of the bag so that the start of each row is not in the middle of the flat part where they are more visible.

11th round – repeat the 5th round working DCs

12th round – repeat the 6th round working SCs

13th round – This round creates the ‘holes’ that we will later weave the bands through.  Chain 4, (miss one stitch and work DC into the next, chain 1)  repeat to end of round.  Join with a slip stitch to the third of the four chains that started the round.

14th round – Chain 2, work one  SC into the ‘hole’ on the previous row.  Continue by working 2SC into each of the ‘holes’ created in the previous round.  Join with a slip stitch to the second of the two chains that started the round.

15th round – repeat the 5th round working DCs

16th round – repeat the 6th round working SCs

17th round – repeat the 13th round, creating the holes.

18th round – repeat the 14th round working SCs into the ‘holes’.

19th round – repeat the 5th round working DCs

20th round – repeat the 6th round working SCs

Change colour!   Working with Yarn C – Light Pink

21st round – repeat the 6th round working SCs

22nd round – repeat the 5th round working DCs

23rd round – repeat the 6th round working SCs

24th round – repeat the 5th round working DCs

25th round – repeat the 6th round working SCs

26th round – repeat the 5th round working DCs

27th round – Chain 2, HDC into each stitch on the row below.   Join with a slip stitch to the second of the two chains that started the row.

28th round – Slip stitch into each stitch on the round below to create the decorative edge.   Join to the start point with a slip stitch and this completes the main part of the bag.

Creating the ‘ribbons’ that weave through the bag.

To create the two ribbons that you will weave in and out of the ‘holes’ in the bag, first take yarn A – Light Grey and make a chain 102 stitches long.

Slip stitch into the third stitch from the hook and keep going with a slip stitch into each chain until you get back to the start point.    Pull both ends through the loop on the hook to finish off, leaving the two ends which you will use to stitch up the ribbon.

Work the second ribbon in the same way but in yarn C – Light Pink.

Creating the flower decorations.

First Flower – Working with Yarn A – Light Grey.

1st round – Make a magic loop then Chain 2, SC 11.  Join to form a disc.

2nd round – (Chain 6 slip stitch into the row below at the base of the chain.   Slip stitch into next stitch) repeat six times.   This will give you a disc with six chain stitch loops that will form the basis of the petals.

Change colour! – working with Yarn C – Light Pink

3rd round – (working into one of the chain stitch loops, 3 SC, 1 HDC, 1DC, 1HDC, 3SC.  work one slip stitch into the stitch on the row below between the chain stitch petals), repeat six times until you have a full set of six petals.   You have a finished flower!

Second Flower – Now work the flower again switching round the two yarn colours.

Assemble the bag by slotting the ribbon through the ‘holes’.    I chose to put the Pink ribbon closest to the bottom and near to the Grey section of the bag.    If you weave the ribbon in and out of the holes over and under the DCs that form the holes you should find you come back to the start with two ‘unders’ side by side.    This is probably easier to see in the photo below than it is to understand my explanation!

Join the two ends of ribbon at this point and then attach the flower over the top of the join, between the two places that the ribbon was woven under the bars.    I used the flower with the Light Pink petals at the bottom of the bag next to the section that was made in Light Grey.   ie use the flower with petals in Yarn C against the ribbon in Yarn C.

Finally – Adding Handles or Strap.

To finish the bag you need to decide whether you would like a shoulder strap or twin handles.    The start point for both is to create ribbons as above.    Each strap or handle needs three ribbons which are plaited.

The ribbon length I used to create the shoulder strap was 202 chain.

The ribbon length I used to create each handle was 82 chain.

Work three ribbons – one in each colour.    Attach the three ribbons to each other at one end.   Note – if you use two of the ribbons the same way around and one the opposite way round you will have ends of yarn at both ends of the plait, this will help with the stitching up.

Using the ends of yarn from each ribbon stitch the handles into the bag – and you are done!!

I hope you enjoyed this pattern.   Please let me know.

Happy Crocheting!

Annie 🙂

Daisy block

by Leave a Comment

Here is the pattern for my latest block design.   I have worked up a few examples, playing with colours and yarn types.   I plan to add a row of these to my spring flowers blanket.   This is the block worked up in those colours using Stylecraft DK yarn and a 4mm hook.

I love playing with an ombré effect.   Here is the block using shades of pink radiating from a white centre.   The white can only be seen from the back!   The yarn here is Drops Paris worked on a 5mm hook.

Here are a couple of the blocks in Drops Muskat, back on a 4mm hook.  One has a coloured flower against a white background.   I really like the sheen on this yarn.   I will put a proper review into my next blog update.   I think a baby blanket with coloured flowers against white would be sweet.   The photo also shows the reverse with white flowers on blue.   You can see I became quite attached to this design quite quickly!

Here is the pattern 

Daisy block – UK terms

Foundation round 1 – Make a magic loop, chain 2, 11 DC into the loop, pull closed and join with a slip stitch

Round 2 – (chain 6, slip stitch into the root of the chain to form a loop, slip stitch into the next 2 stitches) x 5, chain 6, slip stitch into the root of the chain to form a loop, slip stitch into the base of the first chain loop. You should have a circle with six loops.

Round 3 – (7 DC into the first six chain loop, slip stitch into the stitch between loops) x 6, slip stitch to join to start point. You should have six petals.

Round 4 – (chain three, slip stitch into the stitch between the petals) x 6, slip stitch to join to the start point. Tip – These chains need to sit behind the petals but will probably be in front as you work them. Don’t worry, you can pull the petals back through at the end of the round.

Round 5 – (work 3 DC into the three chain loop, 1CH) x 6, slip stitch to join to start point.

Round 6 – chain 3, 2 Tr, (2Tr into the chain space, 3 Tr) x 2, 1Tr into the chain space, (3Tr, 2Tr into the chain space) x 2, 3Tr, 1Tr into the chain space. Join with a slip stitch to the top of the starting 3 chains.

Round 7 – chain 4, (Tr, chain 1) x 27, join with a slip stitch to the third chain in the 4 chains that started the round.

Round 8 – this is where we square the circle! Ch2, DC into the first chain space. Complete the round by working two stitches into each chain space as follows: (DC HTr, HTr Tr, Tr DTr, 2 chain, DTr Tr, Tr HTr, HTr DC, 2DC) x 3, DC HTr, HTr Tr, Tr DTr, 2 chain, DTr Tr, Tr HTr, HTr DC, slip stitch to join to the top of the two chains the started the round.

Round 9 – 2ch, work DC into each stitch. At the corners work 2DC, 2ch, 2DC into the two chain space. At the end of the round join with a slip stitch to the top of the two chains the started the round. And you are done! Sit back and admire or plan the project you are going to make with this lovely little block!

Daisy block – US terms

Foundation round 1 – Make a magic loop, chain 2, 11 SC into the loop, pull closed and join with a slip stitch

Round 2 – (chain 6, slip stitch into the root of the chain to form a loop, slip stitch into the next 2 stitches) x 5, chain 6, slip stitch into the root of the chain to form a loop, slip stitch into the base of the first chain loop. You should have a circle with six loops.

Round 3 – (7 SC into the first six chain loop, slip stitch into the stitch between loops) x 6, slip stitch to join to start point. You should have six petals.

Round 4 – (chain three, slip stitch into the stitch between the petals) x 6, slip stitch to join to the start point. Tip – These chains need to sit behind the petals but will probably be in front as you work them. Don’t worry, you can pull the petals back through at the end of the round.

Round 5 – (work 3 SC into the three chain loop, 1CH) x 6, slip stitch to join to start point.

Round 6 – chain 3, 2 DC (2DC into the chain space, 3 DC) x 2, 1DC into the chain space, (3DC, 2DC into the chain space) x 2, 3DC, 1DC into the chain space. Join with a slip stitch to the top of the starting 3 chains.

Round 7 – chain 4, (DC, chain 1) x 27, join with a slip stitch to the third chain in the 4 chains that started the round.

Round 8 – this is where we square the circle! Ch2, SC into the first chain space. Complete the round by working two stitches into each chain space as follows: (SC HDC, HDC DC, DC TR, 2 chain, TR DC, DC HDC, HDC SC, 2SC) x 3, SC HDC, HDC DC, DC TR, 2 chain, TR DC, DC HDC, HDC SC, slip stitch to join to the top of the two chains the started the round.

Round 9 – 2ch, work SC into each stitch. At the corners work 2SC, 2ch, 2SC into the two chain space. At the end of the round join with a slip stitch to the top of the two chains the started the round. And you are done!

I hope you enjoy this pattern as much as I enjoyed creating it.   Happy crocheting!

Annie 🙂

Wagon Wheel Block

by Leave a Comment

Hello!   This post contains a Free Pattern for my Wagon Wheel Block.   I wanted to create a block that would lend itself to Ombre projects and would also be suitable for stash busting as I have a lot of small remnants of yarn left over from my larger crochet blanket projects.

The pattern is made of simple stitches so should be suitable for beginners.    I made this up in Drops Paris which is 100% cotton in aran weight and works up on a 5mm hook.

Wagon Wheel Block – UK terms

Round 1.    Chain five and join to make a circle.

Round 2.    Chain 2, work 12 DC into the circle and join with a slip stitch to the second chain that started the round.

Round 3.     Chain 4,  (Tr, chain 1) repeat 11 times so that you have thirteen spokes to the wheel – (the chain that started the round plus 12 more spokes).   Slip stitch into the third chain of the 4 chains that started the round.

Round 4.     chain 2, DC into the space between the trebles on the previous round.   (2 DC into the space between trebles) repeat 11 times.   So you have two DC between each of the trebles on the previous row.   Join with a slip stitch to the second of the chains that started the round.

Round 5.     Chain 4, (Tr, chain 1) repeat 24 times so that you have 26 spokes to the wheel – (the chain that started the round plus 25 more spokes).   Slip stitch into the third chain of the 4 chains that started the round.

Round 6.     Chain 2, DC into the space between the trebles on the previous round.   (2 DC into the space between trebles) repeat 24 times.   So you have two DC between each of the trebles on the previous row.   Join with a slip stitch to the second of the chains that started the round.

Round 7.    Chain 2, (2DC into same stitch, Htr, 2 Tr into same stitch, DTr,  chain 5, miss three stitches and DTr into fourth stitch, 2Tr into same stitch, Htr, 2 DC into same stitch, DC, DC)  repeat twice, 2DC into same stitch, Htr, 2 Tr into same stitch, DTr,  chain 5, miss three stitches and DTr into fourth stitch, 2Tr into same stitch, Htr, 2 DC into same stitch, DC.  join with a slip stitch to the second of the chains that started the round.

Round 8.   Chain 2, DC into each stitch from the row below to the corner 5 chains.   Work into each corner 3 DC, 2 chain, 3 DC.  Repeat to end of round and join with a slip stitch to the second of the chains that started the round.

Round 9.     Chain 2, DC into each stitch from the row below.   At each corner work 2DC, chain 2, 2DC into the 2 chain space on the row below.    At end of round join with a slip stitch to the second of the chains that started the round.

NOTE – where you are changing colour on each round to create the ombre effect it works well if you move the start of each colour around rather than start and stop in the same place each time.

Wagon Wheel Block – US terms

Round 1.    Chain five and join to make a circle.

Round 2.    Chain 2, work 12 SC into the circle and join with a slip stitch to the second chain that started the round.

Round 3.     Chain 4,  (DC, chain 1) repeat 11 times so that you have thirteen spokes to the wheel – (the chain that started the round plus 12 more spokes).   Slip stitch into the third chain of the 4 chains that started the round.

Round 4.     chain 2, SC into the space between the trebles on the previous round.   (2 SC into the space between trebles) repeat 11 times.   So you have two SC between each of the trebles on the previous row.   Join with a slip stitch to the second of the chains that started the round.

Round 5.     Chain 4, (DC, chain 1) repeat 24 times so that you have 26 spokes to the wheel – (the chain that started the round plus 25 more spokes).   Slip stitch into the third chain of the 4 chains that started the round.

Round 6.     Chain 2, SC into the space between the trebles on the previous round.   (2 SC into the space between trebles) repeat 24 times.   So you have two SC between each of the trebles on the previous row.   Join with a slip stitch to the second of the chains that started the round.

Round 7.    Chain 2, (2SC into same stitch, HDC, 2 DC into same stitch, TRC,  chain 5, miss three stitches and TRC into fourth stitch, 2DC into same stitch, HDC, 2 SC into same stitch, SC, SC)  repeat twice, 2SC into same stitch, HDC, 2 DC into same stitch, TRC,  chain 5, miss three stitches and TRC into fourth stitch, 2DC into same stitch, HDC, 2 SC into same stitch, SC.  join with a slip stitch to the second of the chains that started the round.

Round 8.   Chain 2, SC into each stitch from the row below to the corner 5 chains.   Work into each corner 3 SC, 2 chain, 3 SC.  Repeat to end of round and join with a slip stitch to the second of the chains that started the round.

Round 9.     Chain 2, SC into each stitch from the row below.   At each corner work 2SC, chain 2, 2SC into the 2 chain space on the row below.    At end of round join with a slip stitch to the second of the chains that started the round

And there it is.   I hope you like it as much as I do.   Happy Crocheting!

Annie 🙂

Hair accessory

by Leave a Comment

Hello!    I wanted to share this free pattern for a hair accessory with you.    Most of my making time at the moment is going into a large blanket made of smaller squares.   I am spending all my time making these squares and finishing off the ends.    The work is a stash buster in its own right as it uses small quantities of yarn to make each square.   However, I am still finding myself with some very small oddments and it hurts me to thrown those away so I have come up with this design to use even the smallest pieces of left over yarn!    Here is the finished result.



Instructions – Hair Accessory.

To make this you need small oddments of yarn, an elastic hair band/tie and the size of crochet hook appropriate to your yarn.   In my case I am using left over Drops Paris yarn which takes a size 5mm hook.

Start by making a magic loop that goes through the middle of the hair band.   I found this a bit of a mind bend to start with!   I am including a picture below so that you can lay your work down and copy mine if that helps!

Work 12 DC (SC US) into the magic loop.    You might need to vary this according to the weight of your yarn.   It doesn’t really matter how many stitches you put into the loop as long as you can pull it tight to circle the hair band – see below.

Without breaking the yarn work a chain to the length you require.   This will form one of the ‘ribbons’ in the final item.   If you are using light/acrylic yarn then the ribbon will spiral so you may need a longer chain.   In the yarn I am using the ribbons do not curl much and I used a chain of between 12 and 16 in the finished piece pictured.

When you have the chain to the length you require work back along the chain either using slip stitches or DC (US terms SC).   The SC will give the effect of a cord, DC (SC US) will give a thicker strip.    Finish off the strip with a slip stitch into the outer edge of the DCs in the magic loop.  This will reinforce the join between the ring and the strips and make the item more robust.

Join in other colours to the DC’s in the magic ring and repeat the steps above to add more strands to the accessory.   Keep these close together on one side of the ring so that the other side can sit against the wearers head without making it uncomfortable.

Finish the piece by sewing in the ends but this need not take long as you can run the loose ends down the length of the ribbons very quickly!    And that is it – you can play with colours – match them to other garments or use any random oddments in your stash!    These could look lovely on flower girls if they were worked all in cream/white or could be made to match the colours of flowers or bridesmaids dresses.

Hope you have a go at this and enjoy the results as much as I did.    I think it is a really fun way to use up tiny scraps of yarn and a lovely break from big projects.  Happy crocheting!

Annie 🙂

Heart square

by Leave a Comment

Hello, in this post I am sharing a free pattern for a heart in a square with you.     A few weeks ago I designed a crochet heart and shared the pattern as a stash busting project.   I wanted to include my stash busting hearts in my Shades of the Rainbow blanket so I have designed a pattern to put the hearts into a square of the same size as my sample squares.

Here is a link to the heart pattern.   This pattern starts with a completed heart.   The heart you made should look like this.   I have also included the heart pattern again at the bottom of this post.

The picture above shows the start point for this pattern and the points where the outside border joins the heart are indicated with an X.

Heart in a Square pattern – UK version (US version below)

First round – slip stitch into the side of the heart in the stitch indicated in the picture above.  CH2, DC into next stitch, CH5, miss three stitches, TR into the next stitch (at the top right of the heart), DC into next stitch, CH5, DC into stitch at the top of the left side of the heart, TR, CH5, miss three stitches, 2DC, CH12, DC into the bottom stitch of the heart, CH12 and slip stitch to the second of the chains that started the round to join to your start point.

Second round – CH2, DC, (2DC, CH2, DC) into the corner, 2DC at the top right hand side of the heart, 5 DC across the centre/top of the heart, 2DC into the top left hand side of the heart, (DC,2CH,2DC) into the left hand corner, 2DC, (7DC, 2CH,5DC) into the bottom left corner, DC into the stitch at the bottom of the heart, (5DC,2CH,7DC) into the bottom right corner and slip stitch to the second of the chains that started the round to join to your start point.

Third round – CH2, DC all round working 2DC,2CH,2DC into the corner chains.

You should end up with a square that looks like this 🙂

Heart in a Square pattern – US version

First round – slip stitch into the side of the heart in the stitch indicated in the picture above.  CH2, SC into next stitch, CH5, miss three stitches, DC into the next stitch (at the top right of the heart), SC into next stitch, CH5, SC into stitch at the top of the left side of the heart, DC, CH5, miss three stitches, 2SC, CH12, SC into the bottom stitch of the heart, CH12 and slip stitch to the second of the chains that started the round to join to your start point.

Second round – CH2, SC, (2SC, CH2, SC) into the corner, 2SC at the top right hand side of the heart, 5 SC across the centre/top of the heart, 2SC into the top left hand side of the heart, (SC,2CH,2SC) into the left hand corner, 2SC, (7SC, 2CH,5SC) into the bottom left corner, SC into the stitch at the bottom of the heart, (5SC,2CH,7SC) into the bottom right corner and slip stitch to the second of the chains that started the round to join to your start point.

Third round – CH2, SC all round working 2SC,2CH,2SC into the corner chains.

In case there are issues with the heart link or just in case you would like this pattern all in one place – here is the heart pattern:

Heart Pattern

UK terms

Make a magic loop, chain 3 and working into the magic loop, 3 dtr, 3tr, chain 1, 1dtr, chain 1, 3tr, 3dtr, chain 2, slip stitch into magic loop and pull the thread to close the centre of the heart.

second round – 2 sl stitch into the gap behind the three chain from the first round.  3dc into the next stitch (top of the left side of the heart), 3 dc into the next stitch and 2 dc into the following stitch.   Work 4 dc to take you to the bottom loop of the heart.  3dc into the bottom stitch of the heart, 4 dc, work 2dc, 3dc, 3dc into the next three stitches, 2 sl stitches and one final slip stitch into the centre of the heart.

third round – 2 slip stitches then 2dc into the next five stitches (around the top of the left side of the heart) 7 dc, 3dc into the bottom stitch of the heart, 7dc, 2dc into the next five stitches, 2 slip stitches and finish off to complete the heart.

US terms

Make a magic loop, chain 3 and working into the magic loop, 3TRC, 3DC, chain 1, 1TRC, chain 1, 3DC, 3TRC, chain 2, slip stitch into magic loop and pull the thread to close the centre of the heart.

second round – 2 sl stitch into the gap behind the three chain from the first round.  3SC into the next stitch (top of the left side of the heart), 3 SC into the next stitch and 2SC into the following stitch.   Work 4SC to take you to the bottom loop of the heart.  3SC into the bottom stitch of the heart, 4SC, work 2SC, 3SC, 3SC into the next three stitches, 2 sl stitches and one final slip stitch into the centre of the heart.

third round – 2 slip stitches then 2SC into the next five stitches (around the top of the left side of the heart) 7 SC, 3SC into the bottom stitch of the heart, 7SC, 2SC into the next five stitches, 2 slip stitches and finish off to complete the heart.

 

That’s all for now.    I will be sharing my completed blanket in a few weeks – just a few more squares to go – and a lot of ends to tie in!!

Happy crocheting!

Annie 🙂

Hearts

by 2 Comments

I looked for a heart motif online and couldn’t find one that was quite right so I made my own!    It is very quick to make up and you can stop before the last row if you need a slightly smaller version.

I am addicted to making them now! These hearts are great for stash busting if, like me, you keep every single scrap of spare yarn and have lots of tiny oddments.   You could use the finished hearts as table decorations, charms or motifs for applique.   Made up in heavier yarn they could even be used as coasters but might need a few more rows adding to make them large enough.

Here is the pattern:

UK terms

Make a magic loop, chain 3 and working into the magic loop, 3 dtr, 3tr, chain 1, 1dtr, chain 1, 3tr, 3dtr, chain 2, slip stitch into magic loop and pull the thread to close the centre of the heart.

second round – 2 sl stitch into the gap behind the three chain from the first round.  3dc into the next stitch (top of the left side of the heart), 3 dc into the next stitch and 2 dc into the following stitch.   Work 4 dc to take you to the bottom loop of the heart.  3dc into the bottom stitch of the heart, 4 dc, work 2dc, 3dc, 3dc into the next three stitches, 2 sl stitches and one final slip stitch into the centre of the heart.

third round – 2 slip stitches then 2dc into the next five stitches (around the top of the left side of the heart) 7 dc, 3dc into the bottom stitch of the heart, 7dc, 2dc into the next five stitches, 2 slip stitches and finish off to complete the heart.

US terms

Make a magic loop, chain 3 and working into the magic loop, 3TRC, 3DC, chain 1, 1TRC, chain 1, 3DC, 3TRC, chain 2, slip stitch into magic loop and pull the thread to close the centre of the heart.

second round – 2 sl stitch into the gap behind the three chain from the first round.  3SC into the next stitch (top of the left side of the heart), 3 SC into the next stitch and 2SC into the following stitch.   Work 4SC to take you to the bottom loop of the heart.  3SC into the bottom stitch of the heart, 4SC, work 2SC, 3SC, 3SC into the next three stitches, 2 sl stitches and one final slip stitch into the centre of the heart.

third round – 2 slip stitches then 2SC into the next five stitches (around the top of the left side of the heart) 7 SC, 3SC into the bottom stitch of the heart, 7SC, 2SC into the next five stitches, 2 slip stitches and finish off to complete the heart.

Hope you like this pattern.  Happy crocheting!

Annie 🙂