• Skip to primary navigation
  • Skip to main content
  • Skip to footer

Stickytapeandstring

Created with WordPress managed by 1&1

  • Craft projects
    • craft business tips
    • craft blog
    • Crochet patterns
    • Upcycling
    • craft with kids
  • Blogging
    • New to blogging
    • Blog diary
  • Bullet Journal
  • About me
  • Welcome!!

bags

Daisy bag

August 26, 2018 by Annie Leave a Comment

This bag was designed on my daily commute.   I love the fresh look with white cotton and picked the colours my daughter liked but the colour way is entirely up to you!

The finished bag measures 10 inches by 7 inches or 25cm by 18cm.   I put on one shoulder strap but it would easily convert to two smaller handles if you prefer.   I have included instructions for both.

The yarn I have used here is Drops Muskat a mercerized cotton which gives great stitch definition and a firm finish that should not stretch with use.   It works up on a 4mm hook and is very good quality/value.   I paid ยฃ1.45 per 50g ball.

Daisy Bag instructions – UK terms  (SCROLL DOWN FOR US TERMS!)

The pattern uses a 4mm hook and three colours of yarn.   For the example in the photo I used:

Yarn A – Drops Muskat – colour 19 – Light Grey

Yarn B – Drops Muskat – colour 18 – White

Yarn C – Drops Muskat – colour 06 – Light Pink

Starting with Yarn A – Light Grey

Base – Chain 5 stitches, slip stitch into the first chain to form a loop.  Chain 35.   slip stitch into the fifth stitch from the hook to form a second loop.

1st round – This is the only real fiddly bit so it is worth taking your time.  Chain 2, DC 30 along the straight chain.  Take care not to let the chain twist as you work it.   Don’t worry if you have to pull it out a couple of times to get it right (I did!).   Work 6DC into the end loop, DC 30 along the straight chain working into the DC’s from the first part of the round.   This gives a strong bottom to the bag.   your work should look like the photo’s below.   Finally – work 6 DC into the end loop and join with a slip stitch to your start point for the round.

2nd round – Chain 2, DC 31, work 2DC into each of the middle four of the six DCs you worked into the loop of the base.  DC 32, work 2DC into the middle four of the six DCs you worked into the second loop of the base.  1 DC, slip stitch to join to the start point of the round.

3rd round – Chain 2, DC 32, work 2DC into the next 6 stitches, DC 35, work 2 DC into the next 6 stitches, 1DC, slip stitch to join to the start point of the round.

The base of the bag is now complete!!  If you would like a bigger base – repeat the row above, adjusting the increase round the ends of the base to allow the work to lie flat.

4th round – Chain 2.   DC into every stitch BUT – only pick up the back of the stitch.  See photo below.   This creates a line that will form the edge of the bottom of the bag.

5th round – Chain 2, Tr into each stitch on the row below.   Slip stitch to join to the top of the three chains that started the round.   Note – lots of patterns would say to chain three before a round  of Trebles but I find that chain 2 works better for me and gives a neater finish.   It might be worth trying both versions to see what suits you best.

6th round – Chain 2, DC into each stitch on the row below.   Slip stitch to join to the top of the two chains that started the round.

7th round – repeat the 5th round working Trebles

8th round – repeat the 6th round working DCs

9th round – repeat the 5th round working Trebles

10th round – repeat the 6th round working DCs

Change colour!   Working with Yarn B – White –   I normally try to join in the yarn on the end of the bag so that the start of each row is not in the middle of the flat part where they are more visible.

11th round – repeat the 5th round working Trebles

12th round – repeat the 6th round working DCs

13th round – This round creates the ‘holes’ that we will later weave the bands through.  Chain 4, (miss one stitch and work Treble into the next, chain 1)  repeat to end of round.  Join with a slip stitch to the third of the four chains that started the round.

14th round – Chain 2, work one  DC into the ‘hole’ on the previous row.  Continue by working 2DC into each of the ‘holes’ created in the previous round.  Join with a slip stitch to the second of the two chains that started the round.

15th round – repeat the 5th round working Trebles

16th round – repeat the 6th round working DCs

17th round – repeat the 13th round, creating the holes.

18th round – repeat the 14th round working DCs into the ‘holes’.

19th round – repeat the 5th round working Trebles

20th round – repeat the 6th round working DCs

Change colour!   Working with Yarn C – Light Pink

21st round – repeat the 6th round working DCs

22nd round – repeat the 5th round working Trebles

23rd round – repeat the 6th round working DCs

24th round – repeat the 5th round working Trebles

25th round – repeat the 6th round working DCs

26th round – repeat the 5th round working Trebles

27th round – Chain 2, Htr into each stitch on the row below.   Join with a slip stitch to the second of the two chains that started the row.

28th round – Slip stitch into each stitch on the round below to create the decorative edge.   Join to the start point with a slip stitch and this completes the main part of the bag.

Creating the ‘ribbons’ that weave through the bag.

To create the two ribbons that you will weave in and out of the ‘holes’ in the bag, first take yarn A – Light Grey and make a chain 102 stitches long.

Slip stitch into the third stitch from the hook and keep going with a slip stitch into each chain until you get back to the start point.    Pull both ends through the loop on the hook to finish off, leaving the two ends which you will use to stitch up the ribbon.

Work the second ribbon in the same way but in yarn C – Light Pink.

Creating the flower decorations.

First Flower – Working with Yarn A – Light Grey.   

1st round – Make a magic loop then Chain 2, DC 11.  Join to form a disc.

2nd round – (Chain 6 slip stitch into the row below at the base of the chain.   Slip stitch into next stitch) repeat six times.   This will give you a disc with six chain stitch loops that will form the basis of the petals.

Change colour! – working with Yarn C – Light Pink

3rd round – (working into one of the chain stitch loops, 3 DC, 1 Htr, 1Tr, 1HTr, 3DC.  work one slip stitch into the stitch on the row below between the chain stitch petals), repeat six times until you have a full set of six petals.   You have a finished flower!

Second Flower – Now work the flower again switching round the two yarn colours.

Assemble the bag by slotting the ribbon through the ‘holes’.    I chose to put the Pink ribbon closest to the bottom and near to the Grey section of the bag.    If you weave the ribbon in and out of the holes over and under the Trebles that form the holes you should find you come back to the start with two ‘unders’ side by side.    This is probably easier to see in the photo below than it is to understand my explanation!

Join the two ends of ribbon at this point and then attach the flower over the top of the join, between the two places that the ribbon was woven under the bars.    I used the flower with the Light Pink petals at the bottom of the bag next to the section that was made in Light Grey.   ie use the flower with petals in Yarn C against the ribbon in Yarn C.

Finally – Adding Handles or Strap.  

To finish the bag you need to decide whether you would like a shoulder strap or twin handles.    The start point for both is to create ribbons as above.    Each strap or handle needs three ribbons which are plaited.

The ribbon length I used to create the shoulder strap was 202 chain.

The ribbon length I used to create each handle was 82 chain.

Work three ribbons – one in each colour.    Attach the three ribbons to each other at one end.   Note – if you use two of the ribbons the same way around and one the opposite way round you will have ends of yarn at both ends of the plait, this will help with the stitching up.   

 

Using the ends of yarn from each ribbon stitch the handles into the bag – and you are done!!   

I hope you enjoyed this pattern.   Please let me know.    US terms follow.

Daisy Bag instructions – US terms

The pattern uses a 4mm hook and three colours of yarn.   For the example in the photo I used:

Yarn A – Drops Muskat – colour 19 – Light Grey

Yarn B – Drops Muskat – colour 18 – White

Yarn C – Drops Muskat – colour 06 – Light Pink

Starting with Yarn A – Light Grey

Base – Chain 5 stitches, slip stitch into the first chain to form a loop.  Chain 35.   slip stitch into the fifth stitch from the hook to form a second loop.

1st round – This is the only real fiddly bit so it is worth taking your time.  Chain 2, SC 30 along the straight chain.  Take care not to let the chain twist as you work it.   Don’t worry if you have to pull it out a couple of times to get it right (I did!).   Work 6SC into the end loop, SC 30 along the straight chain working into the SC’s from the first part of the round.   This gives a strong bottom to the bag.   your work should look like the photo’s below.   Finally – work 6 SC into the end loop and join with a slip stitch to your start point for the round.

2nd round – Chain 2, SC 31, work 2SC into each of the middle four of the six SCs you worked into the loop of the base.  SC 32, work 2SC into the middle four of the six SCs you worked into the second loop of the base.  1 SC, slip stitch to join to the start point of the round.

3rd round – Chain 2, SC 32, work 2SC into the next 6 stitches, SC 35, work 2 SC into the next 6 stitches, 1SC, slip stitch to join to the start point of the round.

The base of the bag is now complete!!  If you would like a bigger base – repeat the row above, adjusting the increase round the ends of the base to allow the work to lie flat.

4th round – Chain 2.   SC into every stitch BUT – only pick up the back of the stitch.  See photo below.   This creates a line that will form the edge of the bottom of the bag.

5th round – Chain 2, DC into each stitch on the row below.   Slip stitch to join to the top of the three chains that started the round.   Note – lots of patterns would say to chain three before a round  of DC but I find that chain 2 works better for me and gives a neater finish.   It might be worth trying both versions to see what suits you best.

6th round – Chain 2, SC into each stitch on the row below.   Slip stitch to join to the top of the two chains that started the round.

7th round – repeat the 5th round working DCs

8th round – repeat the 6th round working SCs

9th round – repeat the 5th round working DCs

10th round – repeat the 6th round working SCs

Change colour!   Working with Yarn B – White –   I normally try to join in the yarn on the end of the bag so that the start of each row is not in the middle of the flat part where they are more visible.

11th round – repeat the 5th round working DCs

12th round – repeat the 6th round working SCs

13th round – This round creates the ‘holes’ that we will later weave the bands through.  Chain 4, (miss one stitch and work DC into the next, chain 1)  repeat to end of round.  Join with a slip stitch to the third of the four chains that started the round.

14th round – Chain 2, work one  SC into the ‘hole’ on the previous row.  Continue by working 2SC into each of the ‘holes’ created in the previous round.  Join with a slip stitch to the second of the two chains that started the round.

15th round – repeat the 5th round working DCs

16th round – repeat the 6th round working SCs

17th round – repeat the 13th round, creating the holes.

18th round – repeat the 14th round working SCs into the ‘holes’.

19th round – repeat the 5th round working DCs

20th round – repeat the 6th round working SCs

Change colour!   Working with Yarn C – Light Pink

21st round – repeat the 6th round working SCs

22nd round – repeat the 5th round working DCs

23rd round – repeat the 6th round working SCs

24th round – repeat the 5th round working DCs

25th round – repeat the 6th round working SCs

26th round – repeat the 5th round working DCs

27th round – Chain 2, HDC into each stitch on the row below.   Join with a slip stitch to the second of the two chains that started the row.

28th round – Slip stitch into each stitch on the round below to create the decorative edge.   Join to the start point with a slip stitch and this completes the main part of the bag.

Creating the ‘ribbons’ that weave through the bag.

To create the two ribbons that you will weave in and out of the ‘holes’ in the bag, first take yarn A – Light Grey and make a chain 102 stitches long.

Slip stitch into the third stitch from the hook and keep going with a slip stitch into each chain until you get back to the start point.    Pull both ends through the loop on the hook to finish off, leaving the two ends which you will use to stitch up the ribbon.

Work the second ribbon in the same way but in yarn C – Light Pink.

Creating the flower decorations.

First Flower – Working with Yarn A – Light Grey.

1st round – Make a magic loop then Chain 2, SC 11.  Join to form a disc.

2nd round – (Chain 6 slip stitch into the row below at the base of the chain.   Slip stitch into next stitch) repeat six times.   This will give you a disc with six chain stitch loops that will form the basis of the petals.

Change colour! – working with Yarn C – Light Pink

3rd round – (working into one of the chain stitch loops, 3 SC, 1 HDC, 1DC, 1HDC, 3SC.  work one slip stitch into the stitch on the row below between the chain stitch petals), repeat six times until you have a full set of six petals.   You have a finished flower!

Second Flower – Now work the flower again switching round the two yarn colours.

Assemble the bag by slotting the ribbon through the ‘holes’.    I chose to put the Pink ribbon closest to the bottom and near to the Grey section of the bag.    If you weave the ribbon in and out of the holes over and under the DCs that form the holes you should find you come back to the start with two ‘unders’ side by side.    This is probably easier to see in the photo below than it is to understand my explanation!

Join the two ends of ribbon at this point and then attach the flower over the top of the join, between the two places that the ribbon was woven under the bars.    I used the flower with the Light Pink petals at the bottom of the bag next to the section that was made in Light Grey.   ie use the flower with petals in Yarn C against the ribbon in Yarn C.

Finally – Adding Handles or Strap.

To finish the bag you need to decide whether you would like a shoulder strap or twin handles.    The start point for both is to create ribbons as above.    Each strap or handle needs three ribbons which are plaited.

The ribbon length I used to create the shoulder strap was 202 chain.

The ribbon length I used to create each handle was 82 chain.

Work three ribbons – one in each colour.    Attach the three ribbons to each other at one end.   Note – if you use two of the ribbons the same way around and one the opposite way round you will have ends of yarn at both ends of the plait, this will help with the stitching up.

Using the ends of yarn from each ribbon stitch the handles into the bag – and you are done!!

I hope you enjoyed this pattern.   Please let me know.

Happy Crocheting!

Annie ๐Ÿ™‚

Filed Under: Craft projects, Crochet patterns Tagged With: bags, basic, beginner, commuter crochet, cotton, crafts, crochet, design, easy, Free pattern, gift, handmade, kids, small bags, small crafts, yarn

Crochet blog – update #8

August 18, 2018 by Annie Leave a Comment

Hello and SORRY – it has been a few weeks since my last post.    I was calling these ‘weekly’ updates but that just hasn’t been happening.    My day job has been REALLY busy for a few weeks but should be calming down now, so hopefully I will get to spend my weekends here again.

I have still been busy with my crochet projects on the train each day.    I have also been able to work on with my Hearts and Spots blanket in the evenings.  Although I don’t want to get my laptop out after a day in the office – I don’t mind a bit of crochet to wind down before bed.

Here are the latest views of the blanket.   I still have to tie in all the ends but it is all stitched together.  The border would be finished if I hadn’t run out of yarn!   The yarn order is in for just two more balls of Drops Paris to complete the project.   The patterns for the squares are on my blog, heart square pattern here and basic square pattern here.   I am not fully happy with the way they fit together so I will be tweaking them over the coming weeks.   I plan to put a smaller version of the blanket together as a kit so watch this space on that.

This project is waaay too big for the train now so I have been working on other things in the mornings and evenings.   I started work designing more blocks and produced a pentagon….  not terribly useful as they don’t tesselate or fit together easily.   I might turn out a pattern for a ball (think football/soccer) at some point using these and a hexagon or two ๐Ÿ™‚  I will put the hexagon pattern up on here in case anyone finds it helpful for a five sided project!   I suppose you could just keep going round and make a pentagon shaped blanket.

My other project on the train has been a little bag.   I am quite pleased with this so far.   It looks a bit basic as it still needs handles, decoration.  I think I might include a lining.   Again I am thinking about putting this pattern together as a kit on Etsy but I will share the pattern for free on the blog as soon as I can get it written up.

I have been using a lighter weight yarn for these two projects, Drops Muskat.   Another winner from Drops as far as I am concerned.  This yarn again is incredible value and consistent quality.  I have yet to find a knot!  The yarn is 100% mercerized cotton with a lovely sheen and tight twist which means that it doesn’t split much if at all when being worked.   Easier if you want to be looking up from the work a bit!  I have been using a 4mm hook for this yarn which seems to work well.  The finished work has great stitch definition so would really show off complicated stitches.

Finally, a team project has started in my house.    It started with me worrying about the cost of yarn.   I began wondering whether it would be possible to get hold of some yarn very cheaply by buying old knitwear and dismantling garments to recover the yarn.   This is where my Mum came in and if I am honest has completely taken over!   A trawl of local charity/thrift shops turned up a number of candidate garments.    We got to work (carefully) with scissors, unpicking and balling and the results have been amazing.    I will put up a separate post on the process and results as I could fill pages with what we found and learned.   For this post, in summary, we have recovered a huge quantity of yarn so far for a tiny outlay.   My Mum is now unstoppable in her search for woollies to dismantle and I have started my first project using this recovered yarn!    I am trying to top up what we find with yarn from my stash but as it stands far more is going into my stash than is coming out!!

Here are some of the pics of the project using the recycled yarn.   The inspiration for the project was the first yarn we recovered – a soft brown boucle yarn flecked with yellow and orange.    I came up with a pattern for a block using a cluster stitch (another new one for me).    I will share the patterns in a separate post.

My husband loves drawing and designing and was once an engineer before moving on to other things so he likes a bit of geometry and maths.    I enlisted his help for this project as I was short on time.   He came up with this layout below which I really like – I think I will be asking him for designs more often!   Here is his sketch.

I have had a very exciting time with the blog this month.   One of my posts on pricing of handmade work seemed to catch attention out there and drove far more page views than I have had previously.   My income from ads ‘soared’ to ยฃ1.83 in one month ๐Ÿ™‚ clearly still a long way to go to being financially secure!

That’s all from me for this post – I have promised a number of follow on posts and patterns so I had better get working!   Please get in touch either by leaving a comment or joining my mailing list.   I love hearing from you all.

Happy crocheting!

Annie ๐Ÿ™‚

 

Filed Under: craft blog, Craft projects Tagged With: bags, blankets, commuter crochet, cotton, crafts, crochet, crochet blog, design, handmade, recycling, recycling yarn, small bags, stash, stash busting, upcycling, yarn, yarn salvage

27 May 2018

June 2, 2018 by Annie Leave a Comment

Hello ๐Ÿ™‚

Welcome to my second update.   I hope you have had a happy, productive week?   I have been busy finishing the little bags I started last week but Sunday did not start well.    I left my crochet in a bag in our living room over night, and this is what I found the following morning….

and this is the likely culprit!    We have three dogs, a mum and two pups.   The pups are just over a year old and still love to chew things!   The puppy in this pic is called Poppy and she is the worst for chewing things.   So far she has demolished various bags and shoes, including some expensive boots and the only pair of pricey sunglasses I have ever bought!    Our fault for leaving things in her reach I suppose.

Luckily for me my Mum loves to untangle yarn so I gave the tangled mess to her and now have a nice tidy ball again.     I finished the bags and basic bag pattern and put a blog post out about that.   bag pattern post.

I also made a few discs and hearts in the process – the discs were the bottom of the bags but I like the look of them on their own.   I might work them into a project of some kind but haven’t quite figured out what yet.    The hearts started out as motifs for the bags, from a basic pattern I found online.  I wasn’t very happy with the pattern so I adapted that to make a few medium and larger ones.  The larger ones are a bit more stable, I am very pleased with the pattern I created.

I am going to experiment with a heavier weight of yarn next.    I think these would make lovely table decorations for a wedding, baby shower or birthday.   I will write up the heart pattern so I can share it with you in a future post.

I made some in brighter colours too in Drops Paris yarn that I am worked sample squares in for a blanket.    I might try to work these hearts into the blanket design!

The other project I have been working on since I spoke to you last, is some bunting for a family birthday.    I put up a separate post on this as I managed to complete the work.   The bunting looks lovely and will be able to be reused unlike the tacky plastic stuff I normally buy.    I have been considering a design for crochet balloons but I am not sure I have that sorted yet ๐Ÿ™‚   My post on the bunting includes the basic flag pattern and explains how I joined them into a garland.    You can read that post here  Bunting Pattern post

Last week I promised an update on my blog goals.    I put quite a bit of thought into this but I haven’t managed to create the bullet journal pages yet.  I am trying to keep it simple as I do find that keeping a bullet journal takes a lot of time.    The time I spend is lovely relaxing mindful time but I am not sure I have enough time available to devote so much of it to keeping a track of progress.   I will try to get these trackers done for next week’s update.   I do worry that I would make more progress if I didn’t spend so long tracking it ๐Ÿ™‚

Status today – I have 544 Pinterest followers so I put on 22 this week.   Nothing exciting has happened with AdSense so I am still on 16p ๐Ÿ™‚   I am getting a few page views, around 80 per week on average but no clicks.     I need to do some research on how to improve that if I want to achieve my goal of being able to spend more time on my crafting and blogging.   Maybe the adverts are not relevant enough.

I haven’t read up on mailing lists yet but mean to do that this weekend so watch this space on that one.   I haven’t listed anything new on Etsy either – I plan to write up the more complicated bag instructions along with some edged bunting and options for decoration then I will list both patterns.    I could list the bunting for sale but I want to use it at home – I will have to make some more!!

Finally, I was soooo thrilled to get a response to my first weekly update so this week I am planning to do a bit more research on my fellow crochet bloggers and leave a few comments on their posts, to see if I can make new connections and support people who are working on similar projects.   That’s all for now – more next week!

Happy crocheting!

Annie ๐Ÿ™‚

 

Filed Under: craft blog, Craft projects Tagged With: bags, beginner blog, Birthday, bunting, commuter crochet, Craft, crochet, design, Free pattern, handmade, small bags, stash busting, wool eating puppies

wedding favours

May 27, 2018 by Annie Leave a Comment

Hello ๐Ÿ™‚   The UK has just been through the most amazing wedding fever!    I don’t know anyone who is getting married soon but wanted to put a bit of time in on a wedding project so I came up with these little bags that could be used for wedding favours or if made a little larger could be given to flower girls to carry.

I have a huge stash of yarn oddments and managed to find some lovely baby pastel colours for this batch but the bags would also look good in bold colours to match any theme.

I will share the basic bag pattern here but as you can see I enjoyed playing around with the design to add in textures and features.    The yellow bag has a heart trim around the top.   The purple bag has a row of hearts around it.    The pattern I am sharing makes the little pink bag the one with the heart motif attached in the photo below.

The pattern is written in UK notation.   For US terms please note:

DC means SC in US notation

TR means DC in US notation

Bag Pattern – start by making a magic circle, chain 3 and work 17 Tr into the circle. Close with a slip stitch into the third chain from the start.

Pull the circle closed.

Work rounds as shown below, each time finish the round by joining to the chain with a slip stitch.

round 2 – chain 1 and work a round of DC, two into each of the stitches in the circle.

round 3 – chain 2 and work a round of TR

round 4 – chain 1 and work a round of DC into the back loop only of the row below.

round 5 – chain 1 and work a round of DC through both loops of the row below

round 6 – chain 2, work a round of TR into both loops of the row below

round 7 & 8 – chain 1 and work a round of DC through both loops of the row below

repeat rows 6 to 8 twice more.

round 15 – chain 4, miss one stitch and work 1 TR into the next.  (Chain 1, miss one stitch and work 1 TR into the next) repeat to the end of the round and join to the third stitch of the first chain with a slip stitch.   This creates the round of ‘holes’ that we will use to thread the ribbon tie through.

round 16 & 17 – repeat round 7

round 18 – repeat round 6

round 19 – finish the work with a row of slip stitches around the top.

Ribbon ties – you could use ribbon to match any theme or make your own ‘ribbon’ using a row of chain.   I found that a chain of 70 was about the right length but you can judge this for yourself.

Hope you like these little bags.    I am going to be making more during the week and will put a few more patterns up for sale in my Etsy shop when I have written them up.

If you want to read about some of the challenges I have had when it comes to crochet in a house with puppies then please check my weekly blog.   Happy crocheting!

Annie ๐Ÿ™‚

Filed Under: Craft projects, Crochet patterns Tagged With: bags, commuter crochet, Craft, crochet blog, design, favours, Free pattern, handmade, small bags, small crafts, stash buster, stash busting, weddings

Footer

Newsletter

Copyright © 2025 ยท Genesis Sample on Genesis Framework ยท WordPress ยท Log in